93
www.analogway.com
PROGRAMMER’S GUIDE
PROGRAMMER’S GUIDE
PROGRAMMER’S GUIDE
PROGRAMMER’S GUIDE
PROGRAMMER’S GUIDE
PROGRAMMER’S GUIDE
PROGRAMMER’S GUIDE
PROGRAMMER’S GUIDE
USER MANUAL
To specify the format to use on the Genlock reference input:
Front Panel
1.
Enter the
OUTPUTS
menu on the Front Panel interface.
2.
Select
GENLOCK REFERENCE
to access the Genlock input setup menu.
3.
Select
OVERLOAD DETECTED FORMAT
.
4.
Scroll down the list of formats detected on the Genlock input and select the format to use on the
Genlock reference input.
Web RCS
1.
Go to the
Setup
menu on the Web RCS interface.
2.
Click on the
OUTPUTS
tab to access the outputs setup page.
3.
In the left side toolbar, select
Genlock Ref
to access the Genlock input settings page.
4.
Under
Overload Detected Format
, select the format to use on the Genlock reference input.
To set up the format using the Genlock reference input:
SEE: Genlock to the dedicated input
Related topics:
•
Output format
•
Screens
•
Audio management
•
Custom formats
•
Configuration backup
