175
www.analogway.com
PROGRAMMER’S GUIDE
PROGRAMMER’S GUIDE
PROGRAMMER’S GUIDE
PROGRAMMER’S GUIDE
PROGRAMMER’S GUIDE
PROGRAMMER’S GUIDE
PROGRAMMER’S GUIDE
PROGRAMMER’S GUIDE
USER MANUAL
Available audio stream sources include:
NONE
No audio
INPUT 1
Embedded audio in input DisplayPort
INPUT 2
Embedded audio in input HDMI on Back panel
INPUT 4
Embedded audio in input Optical
INPUT 5
Embedded audio in input SDI
INPUT 6
Embedded audio in input DVI-D
INPUT 7
Embedded audio in input HDMI on front panel
To A/V map an input (follow mapping mode):
Front Panel
1.
Enter the
AUDIO
menu on the Front Panel interface.
2.
Scroll down and select
A/V Mapping
to access the A/V mapping menu.
3.
Select
Mode > FOLLOW MAPPING
to enable the follow mapping mode.
4.
Scroll down and select an input to start editing the A/V mapping for that input.
Remark:
In
Follow Mapping
mode, the output follows the A/V mapping of the input selected at runtime (output A/V mapping
by video source selection). Consequently, the output A/V mapping will change when editing the A/V mapping of the currently
selected input.
5.
Select
Video Src. (eAUDIO)
to set the input A/V mapping source (audio embedded in video stream
source selection).
Available audio stream sources include:
NONE
No audio
INPUT 1
Embedded audio in input DisplayPort
INPUT 2
Embedded audio in input HDMI on Back panel
INPUT 4
Embedded audio in input Optical
INPUT 5
Embedded audio in input SDI
INPUT 6
Embedded audio in input DVI-D
INPUT 7
Embedded audio in input HDMI on front panel
NOTE:
The input will be mapped to the audio stream source selected here, and the audio detected in the input signal (if any)
will not be used.
