Analog way V701 Скачать руководство пользователя страница 88

Страница: 88 / 237

www.analogway.com

PROGRAMMER’S GUIDE

USER MANUAL

To configure a pattern:

Front Panel

Enter the

OUTPUTS

menu on the Front Panel interface.

Select

STANDARD OUTPUT

to access the standard output setup menu.

Select

Pattern

to access the output pattern setup menu.

NOTE:

You can also use the front panel Test Pattern key button to access the output pattern setup menu directly.

Uncheck the

Inhibit Output Pattern

check-box to enable pattern display on the output.

NOTE:

You can enable and disable pattern display whenever required by checking/unchecking the

Inhibit Output Pattern

check-box. All pattern adjustments will be remembered when enabling/disabling pattern display.

Select

Pattern

and choose the pattern to display on the output.

If required, adjust the pattern settings.
Available pattern settings include:

•

Inhibit Colorimetry:

Check to disable the output colorimetry adjustments on the pattern

(uncheck to enable).

•

Motion:

Check to enable a live movement on the pattern.

•

Pattern Area:

Area where the pattern applies.

Possible pattern areas include:

FORMAT

Fit pattern in all format resolution

AOI

Fit pattern in all AOI

•

Format Raster Box:

Check to display a dotted line all around the format.

•

AOI Raster Box:

Check to display a dotted line all around the AOI area.

Web RCS

Go to the

Setup

menu on the Web RCS interface.

Click on the

OUTPUTS

tab to access the outputs setup page.

In the left side toolbar, select

STANDARD OUTPUT

to access the standard output setup page.

Click on the

Patterns

tab to access the output pattern settings page.

Uncheck the

Hide

check-box to enable pattern display on the output.

NOTE:

You can enable and disable pattern display whenever required by checking/unchecking the

Hide

check-box. All pattern

adjustments will be remembered when enabling/disabling pattern display.

Under

Pattern

, select the pattern to display on the output.

If required, adjust the pattern settings.
Available pattern settings include:

•

Inhibit Colorimetry:

Check to disable the output colorimetry adjustments on the pattern

(uncheck to enable).

•

Motion:

Check to enable a live movement on the pattern.

Содержание V701














































































































































































































































Результаты поиска

Содержание V701

Отзывы:

Похожие инструкции для V701

Бренды по названию

Популярные бренды

Analog way V701, Руководство пользователя

Результаты поиска

Содержание V701

Отзывы:

Похожие инструкции для V701

Бренды по названию

Популярные бренды