Analog way V701 Скачать руководство пользователя страница 36

Страница: 36 / 237

www.analogway.com

PROGRAMMER’S GUIDE

USER MANUAL

TIP:

Check the

Safe Input Select

check-box to disable the selection of inputs for which no valid signal has been

detected.

To disable the selection of inputs without signal:

Front Panel

Enter the

CONTROL

menu on the Front Panel interface.

Scroll down and select

Front Panel

to access the front panel settings menu.

Check the

Safe Input Select

check-box to disable the selection of inputs without signal (uncheck to

enable).

NOTE:

•

Only the front panel

INPUT SELECTION

buttons of those inputs for which no valid signal has been detected will be

disabled.

•

Inputs without signal will still be available for selection via the Web RCS interface, and all input settings will remain

available from both the

Front Panel

and the

Web RCS

interfaces.

Web RCS

Go to the

Setup

menu on the Web RCS interface.

Click on the

CONTROL

tab to access the device settings and control functions.

In the left side toolbar, select

Front Panel

to access the front panel settings page.

Check the

Safe Input Select

check-box to disable the selection of inputs without signal (uncheck to

enable).

NOTE:

•

Only the front panel

INPUT SELECTION

buttons of those inputs for which no valid signal has been detected will be

disabled.

•

Inputs without signal will still be available for selection via the

Web RCS

interface, and all input settings will remain

available from both the

Front Panel

and the

Web RCS

interfaces.

Содержание V701














































































































































































































































Результаты поиска

Содержание V701

Отзывы:

Analog way V701, Руководство пользователя, Страница: 36 / 237

Результаты поиска

Содержание V701

Отзывы: