183
www.analogway.com
PROGRAMMER’S GUIDE
PROGRAMMER’S GUIDE
PROGRAMMER’S GUIDE
PROGRAMMER’S GUIDE
PROGRAMMER’S GUIDE
PROGRAMMER’S GUIDE
PROGRAMMER’S GUIDE
PROGRAMMER’S GUIDE
USER MANUAL
6.
Click on the
Mono
button to force the mono mode of the audio pair (click again to disable mono
mode and enable stereo mode).
Remember:
If channel pairs are linked, the first channel pair setting will be used for all pairs.
TIP:
Use the
All
shortcut button to apply this setting to all inputs and channel pairs at once.
TIP:
Click on the
Headphone
button if required (located under the input) to prelisten to the selected audio pair on the
headphone output.
To adjust the balance of a channel pair:
Front Panel
1.
Enter the
AUDIO
menu on the Front Panel interface.
2.
Select
Input Settings
and select an input to set up the audio input.
3.
Select a
Settings Mode
to set up the audio:
•
Select
BASIC
to link channel pairs and use the first channel pair settings for all pairs;
•
Select
ADVANCED
to unlink channel pairs and set up channel pairs individually.
NOTE:
On the
Line In input,
there is only one single channel pair and the Settings Mode option is not available.
4.
Select a channel pair if required to set up the channel pairs.
NOTE:
•
In
BASIC
settings mode, only the first channel pair settings are available and there is no need to select a channel pair.
•
In
ADVANCED
settings mode, you can select a channel pair to access the channel pair settings.
•
On the
Line In
input, there is only one single channel pair and there is no need to select a channel pair either to access
the channel pair settings.
5.
Select
Balance
to adjust the balance of the audio pair.
Remember:
If channel pairs are linked, the first channel pair setting will be used for all pairs.
TIP:
Toggle the
Listen on the Headphone
box if required to prelisten to the audio pair on the headphone output.
