142
www.analogway.com
PROGRAMMER’S GUIDE
PROGRAMMER’S GUIDE
PROGRAMMER’S GUIDE
PROGRAMMER’S GUIDE
PROGRAMMER’S GUIDE
PROGRAMMER’S GUIDE
PROGRAMMER’S GUIDE
PROGRAMMER’S GUIDE
USER MANUAL
5.
Under
Mask
, select the units used to mask the view:
•
Select
PERCENT
to set up the view using relative (percent) units.
•
Select
PIXELS
to set up the view using absolute (pixel) units.
6.
Edit the following parameters:
•
Mask Left:
Mask area on the left of the input content.
•
Mask Right:
Mask area on the right of the input content.
•
Mask Top:
Mask area at the top of the input content.
•
Mask Bottom:
Mask area at the bottom of the input content.
TIP:
Use the
Reset
button if required to reset the mask (no mask).
To control the transparency:
Front Panel
1.
Enter the
INPUTS
menu on the Front Panel interface.
2.
Scroll down and select an input to access the selected input setup menu.
TIP:
Double-click on an
INPUT SELECTION
button to shortcut to the input setup menu directly.
3.
Select "View" Settings to access the input's view settings menu.
4.
Select Alpha to adjust the transparency of the input in the screen (use max alpha for min
transparency).
Web RCS
1.
Go to the
Edit
menu on the Web RCS interface.
2.
Select the
SCREEN
tab to access the screen edit page.
3.
In the left side toolbar, select the
INPUT
to display on the output.
4.
In the right side toolbar, select the
View
tab to access the input's view settings.
