79
www.analogway.com
PROGRAMMER’S GUIDE
PROGRAMMER’S GUIDE
PROGRAMMER’S GUIDE
PROGRAMMER’S GUIDE
PROGRAMMER’S GUIDE
PROGRAMMER’S GUIDE
PROGRAMMER’S GUIDE
PROGRAMMER’S GUIDE
USER MANUAL
8.
Wait for the
Format generation in progress
screen to check the new format settings.
9.
Once the setup is complete, press the
EXIT-MENU
button to return to the output setup menu.
TIP:
Go to the output setup menu and select
Framelock Tune
to adjust the vertical and horizontal offsets to
apply to the output signal.
•
Offset H:
Offset in pixels (ratio of 1 line) to apply to the output signal.
•
Offset V:
Offset in lines (ratio of 1 frame) to apply to the output signal.
Web RCS
1.
Go to the
Setup
menu on the Web RCS interface.
2.
Click on the
OUTPUTS
tab to access the outputs setup page.
3.
In the left side toolbar, select
STANDARD OUTPUT
to access the standard output setup page.
4.
Click on the
Signal
tab to access the output format setup page.
5.
Under
SIGNAL > Format Mode
, select
FRAMELOCK
to use a Framelock/video reference to set up the
format.
6.
Click on
Format
and select a format from the list of formats compatible with the Framelock/video
mode.
7.
Click on
Reference
and select the Framelock/video reference.
NOTE:
All inputs can be used as Framelock reference.
Available input references for framelock include:
INPUT 1
Framelock on DisplayPort input
INPUT 2
Framelock on HDMI input on back panel
INPUT 3
Framelock on HD15 input
INPUT 4
Framelock on Optical input
INPUT 5
Framelock on SDI input
INPUT 6
Framelock on DVI-D input
INPUT 7
Framelock on HDMI input on front panel
INPUT OPT 1
Framelock on input on option card 1
INPUT OPT 2
Framelock on input on option card 2
INPUT GENLOCK
Framelock on genlock input
8.
Under
Mode
, select the rate mode multiplier.
Available rate modes for framelock include:
MODE x0.5
The reference rate is the reference signal rate divide by 2 (two times slower)
MODE x1
The reference rate is the reference signal rate
MODE x2
The reference rate is the reference signal rate multiply by 2 (two times faster)
Rate mode restrictions:
The product "Input Reference Ra
te x Rate Factor" must be ≥ 23.97 Hz and ≤ 120 Hz.
9.
If required, adjust the vertical and horizontal offsets to apply to the output signal:
•
Offset H:
Offset in pixels (ratio of 1 line) to apply to the output signal.
•
Offset V:
Offset in lines (ratio of 1 frame) to apply to the output signal.
10.
Select
APPLY
to save and apply the new settings.
