31
www.analogway.com
PROGRAMMER’S GUIDE
PROGRAMMER’S GUIDE
PROGRAMMER’S GUIDE
PROGRAMMER’S GUIDE
PROGRAMMER’S GUIDE
PROGRAMMER’S GUIDE
PROGRAMMER’S GUIDE
PROGRAMMER’S GUIDE
USER MANUAL
The
VIO 4K
is equipped with a power AC Main switch with Fuse (cartridge 5x20 4A Fast 250VAC) that allows
you to easily connect and disconnect the unit from the mains.
To power-up your device:
1.
Plug-in the power supply cord to the
VIO 4K
(
SEE: Rear panel physical description
).
2.
Switch on the
VIO 4K
power supply button located on the rear panel.
NOTE:
The
VIO 4K
will start up in standby mode if you shut down the device in standby mode with the back to standby power
loss function enabled (SEE:
Back to standby function
for details). If required, press the front panel
ON/OFF
button for about 3
seconds to wake up the device
.
The
VIO 4K
is equipped with a low power consumption standby mode that you can quickly activate and
deactivate using the Front Panel
ON/OFF
button.
To send the device to standby:
1.
Press the
VIO 4K
front panel
ON/OFF
button.
2.
When asked for confirmation, select
YES
to send the device to standby or
NO
to cancel the action.
NOTE:
The
VIO 4K
will start up in standby mode if you shut down the device with the back to standby power loss function enabled
(SEE:
Alternative method
below for more details).
Alternative method (Front Panel):
1.
Enter the
CONTROL
menu on the Front Panel interface.
2.
Select
Functions
to access the device functions menu.
3.
Select
Standby Settings
to access the device standby settings menu.
4.
Select the
Standby power loss behavior
option if required to choose the behavior of the standby
function in case of power loss while in standby:
•
REMAIN ON STDBY
will keep the device in standby mode.
•
REBOOT
will start up the device in wake up mode.
5.
Finally, select
Standby request
to send the device to standby.
6.
When asked for confirmation, select
YES
to send the device to standby or
NO
to cancel the action.
5
Device management
5.1
Powering-up
5.2
Sending the device to standby
