117
www.analogway.com
PROGRAMMER’S GUIDE
PROGRAMMER’S GUIDE
PROGRAMMER’S GUIDE
PROGRAMMER’S GUIDE
PROGRAMMER’S GUIDE
PROGRAMMER’S GUIDE
PROGRAMMER’S GUIDE
PROGRAMMER’S GUIDE
USER MANUAL
TIP:
Go to the
CUSTOMIZE
menu and select
HDCP Manager
to manage HDCP on all input plugs.
Web RCS
1.
Go to the
Setup
menu on the Web RCS interface.
2.
Click on the
INPUTS
tab to access the inputs setup page.
3.
In the left side toolbar, select an input to access the selected input setup page.
4.
Select the
Signal
tab to access the plug settings page.
5.
Under
HDCP
, uncheck the
Enable
check-box to disable HDCP on the input plug (check to enable).
NOTE:
•
With HDCP
enabled
(default), the HDCP negotiation is maintained even if the DVI, HDMI or DisplayPort plug is not the
current plug (active input).
•
With HDCP
disabled
, none of the HDCP sources can be displayed.
TIP:
Use the
Quick Setup
button (located at the bottom of the Web RCS interface) to manage HDCP on all
input plugs.
To check the HDCP status of an input plug:
Front Panel
1.
Enter the
INPUTS
menu on the Front Panel interface.
2.
Scroll down and select an input to access the selected input setup menu.
TIP:
Double-click on an
INPUT SELECTION
button to shortcut to the input setup menu directly.
3.
Select the plug settings to access the input plug settings menu.
4.
Select
Status
to check the input plug status.
5.
Under
Format > HDCP
, check the HDCP status of the input plug.
TIP:
Go to the
CUSTOMIZE
menu and select
HDCP Manager
to manage HDCP on all input plugs.