51
www.analogway.com
PROGRAMMER’S GUIDE
PROGRAMMER’S GUIDE
PROGRAMMER’S GUIDE
PROGRAMMER’S GUIDE
PROGRAMMER’S GUIDE
PROGRAMMER’S GUIDE
PROGRAMMER’S GUIDE
PROGRAMMER’S GUIDE
USER MANUAL
To import a configuration:
Information:
Your device will automatically reboot once the import is complete.
Front Panel
NOTE:
You will need a USB key to import a configuration via the front panel.
Before you start:
•
Plug-in a USB key into the
USB HOST
port (located in the front panel).
•
Wait until the device is properly recognized and then proceed to import your configuration as described below.
1.
Enter the
SERVICES
menu on the Front Panel interface.
2.
Select
Device Config
to access the device configuration menu.
3.
Select
Import
and choose the import type.
Available import types include:
TO DEVICE
Import a configuration and load it on the device
TO DEVICE STORAGE
Import a configuration and save it to the device storage
(
SEE also: Saving a configuration to the device storage
)
4.
Use the USB device browser to select the configuration to import.
TIP:
Use the
ENTER
and
EXIT-MENU
keys to navigate through folders.
5.
Select the categories to import if required and then select
Import Config
.
Available import categories include:
General configuration
General configuration
Front Panel configuration
Front Panel configuration
Communication interfaces
Communication interfaces
Input parameters
Input parameters
Output parameters
Output parameters
Audio parameters
Audio parameters
GPO parameters
GPO parameters
WebRCS settings
WebRCS settings
Current preset parameters
Current preset parameters
Custom formats library
Custom format library
Preset and view library
Preset and view library
EDID library
EDID library
Input EDID
Input EDID
Device logs
Device logs
All
All categories
6.
Select
Confirm
to start the import.
NOTE:
•
When importing
to the device
, this action will restore your device with the selected categories.
•
The selection of categories to import is not available when importing a configuration
to the device storage
.
