186
www.analogway.com
PROGRAMMER’S GUIDE
PROGRAMMER’S GUIDE
PROGRAMMER’S GUIDE
PROGRAMMER’S GUIDE
PROGRAMMER’S GUIDE
PROGRAMMER’S GUIDE
PROGRAMMER’S GUIDE
PROGRAMMER’S GUIDE
USER MANUAL
Remember:
Use the
Reset All
shortcut button to reset all inputs and channel pairs at once.
TIP:
Click on the
Headphone
button if required (located under the input) to prelisten to the selected audio pair on
the headphone output.
To enable the equalizer:
Front Panel
1.
Enter the
AUDIO
menu on the Front Panel interface.
2.
Select
Input Settings
and select an input to set up the audio input.
3.
Select a
Settings Mode
to set up the audio:
•
Select
BASIC
to link channel pairs and use the first channel pair settings for all pairs.
•
Select
ADVANCED
to unlink channel pairs and set up channel pairs individually.
NOTE:
On the
Line In
input, there is only one single channel pair and the
Settings Mode
option is not available.
4.
Select a channel pair if required to set up the channel pair:
NOTE:
•
In
BASIC
settings mode, only the first channel pair settings are available and there is no need to select a channel pair.
•
In
ADVANCED
settings mode, you can select a channel pair to access the channel pair settings.
•
On the
Line In
input, there is only one single channel pair and there is no need to select a channel pair either to access
the channel pair settings.
5.
Select
Equalizer
and check the
Enable
check-box to enable the equalizer on the audio pair (uncheck
to disable).
6.
Select
TREBLE
,
MID
or
BASS
to adjust the treble, mid or bass gain, respectively.
