101
www.analogway.com
PROGRAMMER’S GUIDE
PROGRAMMER’S GUIDE
PROGRAMMER’S GUIDE
PROGRAMMER’S GUIDE
PROGRAMMER’S GUIDE
PROGRAMMER’S GUIDE
PROGRAMMER’S GUIDE
PROGRAMMER’S GUIDE
USER MANUAL
Front panel
1.
Enter the
INPUTS
menu on the Front Panel interface.
2.
Select
AUTOSET ALL INPUTS
to request the automatic setup of all plugs of all inputs.
•
Select
YES
to confirm (
/!\
displayed inputs may flicker and input plugs may change temporarily).
•
Select
NO
to cancel the request.
Web RCS
1.
Go to the
Setup
menu on the Web RCS interface.
2.
Click on the
INPUTS
tab to access the inputs setup page.
3.
In the left side toolbar, select
General
to access the general inputs setup page.
4.
Click on the
Autoset All
button to request the automatic setup of all plugs of all inputs.
TIP:
•
On the
Front Panel
interface, double-click on an input selection key button to access the input setup menu.
NOTE
: this action will also select the input.
•
On the
Web RCS
interface, hover over an input preview and click on the
Setup
button to access the input setup
menu.
7.5
Setting up an input
