77
www.analogway.com
PROGRAMMER’S GUIDE
PROGRAMMER’S GUIDE
PROGRAMMER’S GUIDE
PROGRAMMER’S GUIDE
PROGRAMMER’S GUIDE
PROGRAMMER’S GUIDE
PROGRAMMER’S GUIDE
PROGRAMMER’S GUIDE
USER MANUAL
To auto-set the format using EDIDs:
Front Panel
1.
Enter the
OUTPUTS
menu on the Front Panel interface.
2.
Select
STANDARD OUTPUT
to access the standard output setup menu.
3.
Select
Format
to access the standard output format setup menu.
4.
Select
AUTO EDID FORMAT
to auto-set the format using a plug's EDID preferred format.
5.
Select the plug used for auto EDID and wait for the
Format generation in progress
screen.
6.
Once the setup is complete, press the
EXIT-MENU
button to return to the output setup menu.
Web RCS
1.
Go to the
Setup
menu on the Web RCS interface.
2.
Click on the
OUTPUTS
tab to access the outputs setup page.
3.
In the left side toolbar, select
STANDARD OUTPUT
to access the standard output setup page.
4.
Click on the
Signal
tab to access the output format setup page.
5.
Under
SIGNAL > Format Mode
, select
AUTO EDID FORMAT.
to auto-set the format using a plug's
EDID preferred format.
6.
Click on
Plug
to select the plug used for auto EDID.
7.
Select
APPLY
to save and apply the new settings.
