194
www.analogway.com
PROGRAMMER’S GUIDE
PROGRAMMER’S GUIDE
PROGRAMMER’S GUIDE
PROGRAMMER’S GUIDE
PROGRAMMER’S GUIDE
PROGRAMMER’S GUIDE
PROGRAMMER’S GUIDE
PROGRAMMER’S GUIDE
USER MANUAL
Web RCS
1.
Go to the
Setup
menu on the Web RCS interface.
2.
Click on the
AUDIO
tab to access the audio management page.
3.
In the left side toolbar, select
General
to access the audio inputs and outputs setup page.
NOTE:
You can also access the audio outputs setup page via the
A/V Mapping
tab.
4.
Under
Audio Outputs
(middle window), enable/disable the
Link
button if required to link/unlink
channel pairs:
•
Enable Link
to link channel pairs and use the first channel pair settings for all pairs.
•
Disable Link
to unlink channel pairs and set up channel pairs individually.
5.
Locate the channel pair to adjust if required.
NOTE:
If channel pairs are
linked
, only the first channel pair settings are available.
6.
Click and drag the
Balance
control bar to adjust the balance of the audio pair.
Remember:
If channel pairs are linked, the first channel pair setting will be used for all pairs.
TIP:
Click on the
Headphone
button if required (located under the input) to prelisten to the selected audio pair on
the headphone output.
