188
www.analogway.com
PROGRAMMER’S GUIDE
PROGRAMMER’S GUIDE
PROGRAMMER’S GUIDE
PROGRAMMER’S GUIDE
PROGRAMMER’S GUIDE
PROGRAMMER’S GUIDE
PROGRAMMER’S GUIDE
PROGRAMMER’S GUIDE
USER MANUAL
TIP:
Click on the
Headphone
button if required (located under the input) to prelisten to the selected audio pair on
the headphone output.
To add a delay to the audio:
Front Panel
1.
Enter the
AUDIO
menu on the Front Panel interface.
2.
Select
Input Settings
and select an input to set up the audio input.
3.
Select
Delay
to add a delay to the audio input.
NOTE:
This setting applies to all channel pairs.
Web RCS
1.
Go to the
Setup
menu on the Web RCS interface.
2.
Click on the
AUDIO
tab to access the audio management page.
3.
In the left side toolbar, select
General
to access the audio inputs and outputs setup page.
NOTE:
You can also access the audio outputs setup page via the
A/V Mapping
tab.
4.
Under
Audio Inputs
(right side window), locate the input to adjust and click and drag the
Delay
control knob to add a delay to the audio input.
NOTE:
This setting applies to all channel pairs.
