Agilent Technologies 5975T LTM GC/MSD, Руководство по устранению неисправностей и техническому обслуживанию

Страница: 7 / 270

Troubleshooting and Maintenance Guide 7
To Attach a Capillary Column Using SilTite Metal Fittings 114
To Disconnect Fused Silica Tubing From a SilTite Fitting 117
Maintaining the Vacuum System 118
To Check and Add Foreline Pump Oil 119
To Drain the Foreline Pump 121
To Refill the Foreline Pump 122
To Maintain the Dry Vacuum Pump 123
To Refill the EI Calibration Vial 125
To Purge the Calibration Valves 127
To Remove the EI Calibration and Vent Valve Assembly 128
To Reinstall the EI Calibration and Vent Valve Assembly 129
To Install a Micro-Ion Vacuum Gauge 130
To Remove the Micro-Ion Vacuum Gauge 132
To Lubricate the Side Plate O-Ring 133
To Lubricate the Vent Valve O-Ring 135
Maintaining the Analyzer 137
To Remove the EI Ion Source 139
To Disassemble the EI Ion Source 141
To Clean the EI Ion Source 143
To Reassemble the EI Ion Source 146
To Reinstall the EI Ion Source 148
To Remove a Filament 149
To Reinstall a Filament 151
To Remove the Heater and Sensor from the Ion Source 152
To Reinstall the Heater and Sensor in the Ion Source 154
To Remove the Heater and Sensor from the Mass Filter 155
To Reinstall the Heater and Sensor in the Mass Filter 156
To Replace the Electron Multiplier Horn 158
Maintaining the Electronics 160
To Adjust the Quad Frequency 162
To Replace the Primary Fuses 164