AEQ
XPEAK
IP Intercom System
91
The
purple lines
indicate communication flows in only one direction (the one indicated by the
arrow) and are associated with commands of "Talk", "Listen" or "Remote One Way" type. The
orange lines
indicate flows in both directions and are associated with "Talk & Listen" or
"Remote Both Ways" commands (also "Talk" or "Listen" commands executed in both directions
between two devices).
Depending on the commands configured for each button, if the communications are established
or not through the corresponding key, and if the "Show all configurations" option is active or not,
a different set of lines will be represented in the scheme.
5.2.4.10. Deleting devices, buttons, groups and families.
The deletion process of any of these system elements is described in sections 5.2.3.1 and
5.2.3.2 of this manual.
On the other hand, the process of erasing a device only from the scheme is described in
sections 5.2.3.1 and 5.2.3.3 of this manual.
5.2.4.11. Snooping.
This option allows the location of a specific panel to be occupied from the PC, that is, the PC
where the application is installed will replicate the selected device in terms of audio, that is,
everything that the physical device is listening to will also be heard on the PC (the audio of all
the devices with which a "listen" command is active) and the audio from the PC (audio played or
from the microphone, depending on how the PC is configured) will replace the audio from the
physical device (reaching all devices with which a "talk" command is active).
When a device is selected, by selecting the "Snooping" option of the "Edit" drop-down menu
(keyboard shortcut "T") or pressing the equivalent button in the lower line
(it changes from
grey to orange when selecting the device and to yellow when pressing the button), this option is
activated.
When the "Snooping" option is active, the rest of the icons of the lower line of the upper left
menu and almost all the menus of the upper line are disabled in order to avoid executing
actions incompatible with this option.
In this situation, the only action that can be executed is to activate or deactivate the buttons of
the device displayed in the lower right quadrant (it's not possible to change the configuration of
those buttons). Additionally, the indication "
SNOOPING
" appears on that quadrant.