AEQ XPEAK Скачать руководство пользователя страница 69 | Manualshive

Страница: 69 / 103

AEQ XPEAK Скачать руководство пользователя страница 69

AEQ

XPEAK

IP Intercom System

69

In  the  case  of  a  device  that  is  visible  on  the
network, this option deletes the device only at a
configuration  level,  that  is,  all  the  buttons
configured at the device and the buttons of the
other devices configured to communicate with it
are  deleted.  The  device  will  still  appear  in  the
list and in the scheme.

After  a  device  is  selected  (the  icon  changes
from grey to orange), when clicking on this icon
those

configurations

are

deleted,

also

interrupting all active communications at that
moment that device was involved in. That’s why
double confirmation is required.

Delete group:

After a group is

selected (the icon changes from
grey to orange), when clicking on

this  icon  the  group  is  deleted,  also
removing  the  buttons  of  the  devices
configured  to  communicate  with  it.  That's
why double confirmation is required.

«
...
67
68
69
70
71
...
»

Содержание XPEAK








































































































Отзывы:

Нет отзывов