AEQ
XPEAK
IP Intercom System
47
3.4. Xpeak_IF menus.
On the operation screen of the unit, the display shows the following information:
The Xpeak_IF I/O interface handles 4 independent audio streams. Each of the 4 lines that
appear on the operation screen is associated with one of those streams; the name of each
stream can be edited from the "AEQ Xpeak" application. In the example above, the presence of
input audio to the second stream and output audio from the third stream is indicated.
Long pressing the "
MENU
(BACK)" key leaves the operation screen, taking us to the device’s
setup menus. Some frequently used options can be found, while other are for configuration.
The screen shows the different available menu options.
The first menu level includes the following three options:
By turning the encoder, we can select any of them. Press the encoder button to enter the
selected option. Pressing "
MENU
(BACK)" takes you back in the menu and repeating the key
press takes you back to the operation screen.
3.4.1.
"
Connection
"
menu.
By pressing the encoder when the "Connection"
option is visible on the screen, you enter this menu
which presents the following options:
•
IP:
Allows us to modify the interface’s IP address.
When accessing this option, the first digit of the current IP address is
selected. By pressing the encoder, the cursor will be highlighted in
red. By turning the encoder, the number can be substituted by
another. Numbers from 0 to 9 can be chosen (the figure that can be
configured in each octet is limited between 0 and 255).
Input audio
presence indicator
Output audio
presence indicator
Interface's
IP address
Audio stream name