AEQ XPEAK Скачать руководство пользователя страница 39 | Manualshive

Страница: 39 / 103

AEQ XPEAK Скачать руководство пользователя страница 39

AEQ

XPEAK

IP Intercom System

39

When the "MODE" option is highlighted in green, by pressing the key labeled as "SELECT" this
second menu is accessed.

This option allows the user to choose which kind of system the beltpack will connect: Conexia,
CrossNET, EasyNET (Party-Line), EasyNET G722 (Party-Line) or Xpeak. Using any of the two
encoders,  the  different  options  can  be  selected,  and  they  are  validated  by  pressing  the
"SELECT"  key.  If  a  system  of  the  selected  type  is  found,  the  center  LED  of  front  panel  will
illuminate  in  steady  green  color.  On  the  other  hand,  if  no  valid  system  is  found,  this  LED  will
blink green.

3.3.3.

"

CONNECTION

"

menu.

This is a configuration menu that allows the user to select the parameters of the Wi-Fi network
the unit will connect to.

When the "CONNECTION" option is highlighted in green, by pressing the "SELECT" key this
third menu is accessed.

Any of the two encoders can be used to navigate through the 6 options of the menu and the
"SELECT" key allows to enter the selected one. The available options are:

•

WiFi Scan:

Allows us to search for available Wi-Fi networks. The key 2 allows you to

refresh the content of the displayed list. You can navigate through the list using any of the
two encoders and choose the Wi-Fi network by pressing the "SELECT" key.

«
...
37
38
39
40
41
...
»

Содержание XPEAK








































































































Отзывы:

Нет отзывов