AEQ XPEAK Скачать руководство пользователя страница 77 | Manualshive

Страница: 77 / 103

AEQ XPEAK Скачать руководство пользователя страница 77

AEQ

XPEAK

IP Intercom System

77

It's also possible to add manually a family from its icon in the lower line:

Next image shows the appearance of the application when different elements (devices, groups
and families) has been added. Information about each device is updated every few seconds in
both the devices and the software, so if there is any modification (name, buttons configuration,
etc.), it is updated in the corresponding device screen, as well as in the devices list. If the group
or family the device is associated to is also modified, the corresponding group or family window
will  be  updated.  Besides,  if  the  devices  that  a  key  or  lever  activates  communication  with  are
shown  in  the  scheme,  a  line  indicating  the  path  between  those  devices  will  appear  when  that
key or lever is pressed.

Each type of device is represented differently both in the list and in the scheme:

«
...
75
76
77
78
79
...
»

Содержание XPEAK








































































































Отзывы:

Нет отзывов