AEQ
XPEAK
IP Intercom System
19
Technical specifications vary from one headset to another, and compatibility with a non-
homologated mode must be consulted first.
The "
Tini-QG
" connector pinout is as follows:
Tini-QG
FUNCTION
1
Microphone GND
2
Earphone (speaker) output -
3
Microphone input
4
Earphone (speaker)
2.3.4. Description of the Charging Terminal.
It has slots to simultaneously charge 2 or 5 devices.
Charging terminal for 5 devices
Each slot has
2 associated LEDs:
•
A green interior LED to assist in positioning.
IMPORTANT:
if this LED is off or blinking this slot should NOT be used: there is some
supply problem and it may damage the device.
•
An upper LED that indicates charging activity:
o
it's off when there's no device in the slot.
o
it turns on red when the device is charging.
o
and green when charging is finished.
o
if it turns off while charging it indicates a problem during this process, such as
charge/precharge time exceeded, overvoltage or battery disconnection).
The charger receives continuous power current from an external power supply. Devices can be
charged both being on and off (if the device is on, the approximate current charge level is
displayed on its screen: it's recommended to wait until the upper LED of the charging terminal
turns on green to consider the device fully charged).