AEQ XPEAK Скачать руководство пользователя страница 90 | Manualshive

Страница: 90 / 103

AEQ XPEAK Скачать руководство пользователя страница 90

AEQ

XPEAK

IP Intercom System

90

In  the  example,  the  family  "F0000003"  consists  of  a  Xpeak_BP,  a  Xpeak_R  and  the  first  2
channels of a Xpeak_IF (devices are highlighted in light grey). It's possible to modify this family
by clicking on any of the devices to include it (marked in light grey) or remove it from the family
(marked  in  dark  grey).  t  can  also  be  accomplished  using  the  keyboard,  moving  around  the
devices using the up and down arrow keys and selecting the ones we want to included with the
right arrow and the ones we want to remove with the left arrow.

IMPORTANT NOTE: Remember that a device can be part of one family only. When a device is
assigned  to  a  family  and  it  was  already  assigned  to  another,  it  is  deleted  from  that  one  and
remains in the new family.

In order to select the family  color, click on the desired color icon (when  on the  color selection
area, you can also use the keyboard’s arrow keys to move between colors).

The name of the family under edition appears in the upper part of the window and, by clicking
on it, it is possible to edit it.

Once  all  changes  are  made,  if  the  button  "

OK

" is clicked on, modifications are saved. On the

other hand, clicking on the "

Cancel

" button discards.

5.2.4.9. Communication flows scheme.

Lines  indicating  communication  flows  between  pairs  of  devices  appear  on  the  scheme  in  the
upper  right  quadrant,  according  to  the  configuration  of  the  cross-point  buttons  in  the  different
devices:

•

If we select the "Show all configuration" option of the "Scheme" drop-down menu (keyboard

shortcut "S") or press the equivalent button in the upper right menu

, a diagram

showing all possible communications between devices is obtained, whether they are active
or not at that moment, that is, regardless of the status of each button.

•

If "Show all configuration" option is not active, only the communication flows active at that
moment will be represented, that is, those in devices with pressed buttons (highlighted in
blue) and where a command is configured.

Have in mind that, in both cases, the "GP Out" type commands will have no associated lines.

The following image shows an example of communication flows between devices:

«
...
88
89
90
91
92
...
»

Содержание XPEAK








































































































Отзывы:

Нет отзывов