AEQ XPEAK Скачать руководство пользователя страница 17 | Manualshive

Страница: 17 / 103

AEQ XPEAK Скачать руководство пользователя страница 17

AEQ

XPEAK

IP Intercom System

17

2.3. Physical description of the Xplorer for Xpeak wireless user beltpack.

2.3.1. Front panel description.

1.

Programmable key. By default, access MENU to configuration options and keyboard LOCK.
The function of the key at all times is related to the information indicated on the label
located on the screen, just below the key. Each key can have two functions, one is activated
with a short press and the other with a long press.

2.

Status indicator.

3.

Programmable key. By default, PAGE (direct paging of keys 1, 2, 3 and 4) and microphone
MUTE. The function of the key at all times is related to the information indicated on the label
located on the screen, just below the key. Each key can have two functions, one is activated
with a short press and the other with a long press.

4.

Four programmable keys for direct access to communication channels, or channel selection
in Party-Line mode, engraved with the numbers 1, 2, 3 and 4. The function of each key at
any time is related to the information indicated in the nearest screen quadrant. Short press
activates or deactivates the communication (latch mode). Long press activates the
communication while the key is pressed (PTT mode). With these 4 keys, complemented by
the PAGE key that develops 4 sets of 4 keys, 16 different communications can be
managed.

5.

2.4” TFT Display.

6.

WiFi Level indicator. 4 levels, according to the number of visible arcs and lack of coverage
indicated with red slash.

7.

Mute indicator for the user's microphone.

8.

User terminal name label.

9.

Battery level indicator.

10.

Four tri-color LED mode indicators. They usually indicate the programming mode of the
intercom channel that is accessed with the key next to the LED.

11.

Input level indicator for each contact or destination.

«
...
15
16
17
18
19
...
»

Содержание XPEAK








































































































Отзывы:

Нет отзывов