AEQ XPEAK Скачать руководство пользователя страница 20 | Manualshive

Страница: 20 / 103

AEQ XPEAK Скачать руководство пользователя страница 20

AEQ

XPEAK

IP Intercom System

20

2.4. Physical description of Xpeak_IF I/O interface.

2.4.1. Front panel description.

1.

USB type A.

2.

Screen.

3.

Rotary encoder with push button.

4.

Key.

2.4.2. Rear panel description.

1.

Power supply connector. AC inlet, fuse and fuse-holder. This device includes an internal
AC/DC power supply, admitting 100 - 240 V AC +/-10%, 50-60Hz (universal auto-range).
Standard 3-pin IEC connector.

2.

USB type-B connectors to connect to a PC. The module includes 4 Digital USB audio input /
outputs, on 4 B-type female connector. Inputs are in digital format and mono, as they are
designed to incorporate or extract audio to/from the Intercom system.

Each of the four USB ports provides 1 digital input and 1 digital output.

When connecting any of the 4 USB ports to a PC, the PC will automatically detect a new

audio device (that is displayed as “USB Audio CODEC”). Audio towards the intercom

system can be sent from any audio playback software as if it was an external professional-

grade soundcard. Also, audio from the Intercom can be recorded on the PC using any audio

recording software. This audio comes from the channels which have been routed to the

corresponding output.

This virtual sound card is "plug&play" under Microsoft Windows™ and Apple Computer Mac

OS™, operating system, and they don’t require any specific driver. If several USB ports

from one or more USB modules are connected to the same PC, the operating system will

mount a new audio device per port, which will be identified as "USB Audio CODEC", "USB

Audio CODEC (2)"…up to "USB Audio CODEC (4)"

IMPORTANT NOTE:

Shielded cable is required to make the connection between the USB

port and PC.

3.

Dual Ethernet port. Two Ethernet RJ45 10/100BaseT connectors can be found which are
used to connect the interface to the network using IP protocols.

Detail of ETHERNET connectors

«
...
18
19
20
21
22
...
»

Содержание XPEAK








































































































Отзывы:

Нет отзывов