AEQ XPEAK Скачать руководство пользователя страница 43

Страница: 43 / 103

AEQ

XPEAK

IP Intercom System

Always ON:

When this option is activated, the screen will always remain ON.

Timeout:

This option allows the user to adjust in seconds the time that the screen

remains active since the last press of a key. It will turn back on when you press any
key.

Wake on call:

This option allows the user to configure the screen to turn on when

an incoming call is received. It turns off again when the "Timeout" expires.

•

Keyboard:

Configures the usage of the left and right function keys.

Their default configuration is as follows:

Left Key (short pressing): MENU.

Left Key (long pressing): LOCK.

Right Key (short pressing): PAGE.

Right Key (long pressing): MUTE.

However, a different configuration may be more adequate depending on the particular

operating way. Press the "SELECT" key when a key and option (short or long pressing) is

highlighted in order to go to next screen, where one among 8 different functions can be

assigned to that key and pressing mode.

Содержание XPEAK








































































































Результаты поиска

Содержание XPEAK

Отзывы:

AEQ XPEAK, Руководство пользователя, Страница: 43 / 103

Результаты поиска

Содержание XPEAK

Отзывы: