AEQ XPEAK Скачать руководство пользователя страница 28 | Manualshive

Страница: 28 / 103

AEQ XPEAK Скачать руководство пользователя страница 28

AEQ

XPEAK

IP Intercom System

28

3.1.5.

"

Info

"

menu.

By pressing the encoder when the "Info" option is
visible on the screen, you enter this menu that allows
us to check the main configuration parameters of the
panel and that presents the following options:

•

Network:

Allows us to check the network configuration of the panel.

The fields that appear are: MAC address, IP address, mask, gateway

and DNS. In section 3.1.3 the way to configure all these parameters is

detailed.

In addition, the Inet (indicates if there is an Internet connection) and

VPN (indicates if the unit is connected to the AEQ VPN service) fields

appear.

•

About:

Allows us to check the operative system version, the firmware

version, the serial number and unit's type (RACK when it's a Xpeak_R
and DESKTOP when it's a Xpeak_D).

3.1.6. Menu differences in other operating modes.

3.1.6.1. All modes except Xpeak.

Xpeak mode is the only one that supports
families  characterized  by  a  defined  color
of  the  LED  associated  to  each  2-axis
lever.  Thus,  these  LEDs  don’t  illuminate
in the rest of operating modes.

3.1.6.2. Conexia and CrossNET modes.

In these modes, operation using a matrix means that specific options are defined in the

CrossMapper

software for general system configuration.

«
...
26
27
28
29
30
...
»

Содержание XPEAK








































































































Отзывы:

Нет отзывов