AEQ XPEAK Скачать руководство пользователя страница 15 | Manualshive

Страница: 15 / 103

AEQ XPEAK Скачать руководство пользователя страница 15

AEQ

XPEAK

IP Intercom System

15

When connecting this port to a PC by means of a proper USB cable, the PC will

automatically detect a new audio device (that is displayed as “USB Audio CODEC”). Audio

towards the intercom system can be sent from any audio playback software as if it was an

external professional-grade soundcard. Also, audio from the Intercom can be recorded on

the PC using any audio recording software. This audio comes from the channels which

have been routed to the corresponding output.

This virtual sound card is “plug&play" under Microsoft Windows™ and Apple Computer Mac

OS™, operating system, and they don’t require any specific driver.

IMPORTANT NOTE:

Shielded cable is required to make the connection between the USB

port and PC.

4.

2 GPIOs multi-pin connector. A 10-pin, 3.5mm pitch pluggable connector can be found. A
screw-terminal male block is provided with the unit. As seen from the rear, and from left to
right, the + and – pins for each of the two GPIs are available. Then, a 5V supply output and
ground, and then the + and – pins for each of the two GPOs.

5V supply is provided to bias external devices such as transistors closing the GPO contacts.

Connecting a 4K7 ohm resistor in series with every circuit is recommended. In any case,

max. supplied current is 50mA, so the equivalent resistance between +5V and GND must

always be >100 ohm.

2.2. Physical description of the Xpeak_BP wired user beltpack.

2.2.1. Front panel description.

«
...
13
14
15
16
17
...
»

Содержание XPEAK








































































































Отзывы:

Нет отзывов