AEQ XPEAK Скачать руководство пользователя страница 35

Страница: 35 / 103

AEQ

XPEAK

IP Intercom System

•

Gateway:

IP address of the gateway to external networks. It is

configured just in the same way as the beltpack’s IP address.

•

DNS:

IP address of the Domain Name Server to be used. It is

configured just in the same way as the beltpack’s IP address.

3.2.4.

Options

menu.

Gives  access  to  a  test  option
where  the  2  encoders  and  the
keys  and  LEDs  of  the  unit's
front can be checked.

3.2.5.

Info

menu.

By pressing the "

PAGE

(MUTE)" key when the "Info"

option  is  visible  on  the  screen,  you  enter  this  menu
that  allows  us  to  check  the  main  configuration
parameters  of  the  beltpack  and  that  presents  the
following options:

•

Network:

Allows us to check the network configuration of the beltpack.

The fields that appear are: MAC address, IP address, mask, gateway

and DNS. In section 3.2.3 the way to configure all these parameters is

detailed.

In addition, the Inet (indicates if there is an Internet connection) and

VPN (indicates if the unit is connected to the AEQ VPN service) fields

appear.

•

About:

Allows us to check the operative system version, the firmware

version, the serial number and unit's type.

Содержание XPEAK








































































































Результаты поиска

Содержание XPEAK

Отзывы:

AEQ XPEAK, Руководство пользователя, Страница: 35 / 103

Результаты поиска

Содержание XPEAK

Отзывы: