AEQ XPEAK Скачать руководство пользователя страница 67

Страница: 67 / 103

AEQ

XPEAK

IP Intercom System

Edit name:

Provides a way to edit the name of a

panel, group or family and substitute it by any
other with a maximum length of 8 characters. In

order  to  do  that  place  the  cursor  on  the  name  to  be
edited  (the  icon  changes  from  grey  to  orange)  and  then
press the icon.

Then the icon returns to grey and the name field
changes to allow edition:

Edit button:

After a device has been selected (appears then in the lower right

quadrant), when we place the cursor over one of its buttons, it is highlighted in yellow

and, when we press it, in orange. If now we press the icon (it changed from grey to

orange) or double-clicking on the button, a window pops up in order to assign commands or
functions to the button.

The buttons or cross-point activation or communication assignation elements in the panels or
beltpacks designated in the software as "button" can be of two kinds:

Содержание XPEAK








































































































Результаты поиска

Содержание XPEAK

Отзывы:

AEQ XPEAK, Руководство пользователя, Страница: 67 / 103

Результаты поиска

Содержание XPEAK

Отзывы: