U
SER
M
ANUAL
750000992/16
3-19
MTS
e
Printing
Attention
Make sure the printer has paper (see "Loading a new roll of paper"
on page 3-26).
1.
Press the
SETUP
key, then the <System setup> softkey and select the internal
printer.
2.
On the "Printer contents" line, select to print either only the trace or only the
table, or both trace + table or the screen.
3.
If the
Screen
option is selected, display the data you wish to print.
4.
Press the
key.
The selected copy of the screen is printed.
Attention
If there is no print on the paper, check if the roll of paper has been
placed in the printer on the right side (see page 3-26) as only one face
of the thermal paper can be printed.
A header containing the mains acquisition parameters will be printed (see the
following table).
Header
A header including the following informations is printed to the top of the copy .
Table 1: Example of header for OTDR results
Instrument parameters
MTS 5200
e
, 101, 1.27
Instrument used for the acquisition, serial number,
software version.
Module:
SI7926HD, 150,
Identification of the module installed in the OTDR during
the acquisition (type, serial number).
File parameters
Trace
Filename of the trace if it has been loaded from memory
storage device.
Title
Title of the trace
Operator
Operator name
Cable Id.
Identification name for the cable
Origin location
Name entered for the origin of the fiber
End Location
Name entered for the end of the fiber
Direction
Direction of the measurement (origin to end or end to
origin)
Acquisition parameters
Measurement Date
Date and time the measurement was made
Laser
Wavelength of the laser used to make the measurement
Pulse
Pulsewidth used to make the measurement
Artisan Technology Group - Quality Instrumentation ... Guaranteed | (888) 88-SOURCE | www.artisantg.com
