iv
U
SER
M
ANUAL
750000992/16
MTS
e
Optical connector
The optical connector is the access point to the laser beam (see figure
below).
Example of a laser connector on the MTS 5100
e
rear panel
The user must take the necessary precautions concerning the optical output of
the instrument and follow the manufacturers instructions.
Important
Measurements on optical fibers are difficult to execute and the preci-
sion of the results obtained depends largely on the precautions taken
by the user.
AC/DC and battery safety
Important
In conformance with the recommendations of standard EN 61010,
the instrument should be operated within the manufacturer’s guide-
lines. Failure to do so may compromise the protection offered by the
instruments design.
Important
Do not use any AC/DC adaptor or battery other than the supplied
accessories. If another adapter or battery is used, it may damage the
MTS
e
itself.
The MTS
e
is supplied with a Nickel Metal Hydrid rechargeable bat-
tery.
Laser emission
Artisan Technology Group - Quality Instrumentation ... Guaranteed | (888) 88-SOURCE | www.artisantg.com