![background image](http://html1.mh-extra.com/html/acterna/mts-5100e/mts-5100e_user-manual_2842380102.webp)
5-38
U
SER
M
ANUAL
750000992/16
Using an OTDR module
MTS
e
Fault location
The OTDR trace is also displayed with the cursors A and B placed on the end of
the fiber. Cursor and Zoom keys are available.
Messages indicate how to return to the instrument configuration menu (
SETUP
key) and to locate the end of the fiber again (
START
key).
The trace may be saved as a normal trace (see chapter 8). After it has been
recorded, it may be viewed:
•
either in OTDR mode (with analysis) if the OTDR function is chosen in the
Instrument configuration
menu.
•
or in Fault location mode (with indication of end of fiber), if the
FAULT
LOCATOR
function is chosen in the
Instrument configuration
menu
Macro
The macro function gives the possibility of starting a sequence of actions (up to
200) by only a single key.
There are five macros :
•
Three user macros (1 to 4)
•
A predefined macro, macro 5 (DUAL LASER) which starts a bi-lambda
measurement with storage of acquisition and comparison of traces.
Artisan Technology Group - Quality Instrumentation ... Guaranteed | (888) 88-SOURCE | www.artisantg.com