Acterna MTS 5100e Скачать руководство пользователя страница 105

Страница: 105 / 219

SER

ANUAL

750000992/16

5-41

MTS

Macro

Loading a macro from a floppy disk

•

Press the

FILE

key.

•

Press the <Explore> key and select the directory of the floppy disk.

•

Press the <Open Dir> key and select the macro file. It has a .mac extension.

•

Press the <Load Macro> keys. The keys <Macro 1>, <Macro 2> , <Macro 3>,

<Macro 4> are displayed.

•

Select one of these positions to transfer the macro.

Use of the macro to store a configuration

With the MTS

set-up with the configuration you wish to save:

•

Press the SET-UP, then the Macro key.

The Macro menu is displayed.

•

Select one of the three user macros and press the <Edit> key to eventually

change the name.

•

Press the <Store> key and confirm the action.

•

Press the <Macro end> key.

The MTS

configuration is saved in the corresponding macro. Loading this

macro will load the configuration.

Set-up parameters saved in the macro

•

the instrument set-up (OTDR for example).

•

the test set-up.

•

the markers if they are locked (by the <Expert> /< Lock markers> function).

•

in the file menu, the Auto-increment and the auto file naming.

•

zoom/shift value, cursor positions, etc.

Note

Instrument and test set-up can only be restored if the instrument is

equipped with the corresponding module.

Macro 5 description

The macro 5 starts a measurement at each wavelength (1310 and 1550 nm or 850

and 1300 nm) and stores the results.

Parameters to set-up before starting the macro

Acquisition parameters

- Manual mode

- Pulsewidth

- Range

- Resolution

- Acquisition time

Configuration parameters

- OTDR Module: Dual-wavelength

- File naming: Auto

- File Nbr Increment: No

Artisan Technology Group - Quality Instrumentation ... Guaranteed | (888) 88-SOURCE | www.artisantg.com

Содержание MTS 5100e




























































































































































































































Результаты поиска

Содержание MTS 5100e

Отзывы:

Похожие инструкции для MTS 5100e

Бренды по названию

Популярные бренды

Acterna MTS 5100e, Руководство пользователя

Результаты поиска

Содержание MTS 5100e

Отзывы:

Похожие инструкции для MTS 5100e

Бренды по названию

Популярные бренды