![background image](http://html1.mh-extra.com/html/acterna/mts-5100e/mts-5100e_user-manual_2842380032.webp)
3-10
U
SER
M
ANUAL
750000992/16
Getting Started
MTS
e
The user will receive the set of floppy disks he need to upgrade his MTS
e
.
Installation of the boot (if necessary)
1.
The MTS
e
being switched off (AC/DC adapter unplugged), insert the disk 1
of the boot into the floppy disk drive.
2.
Plug in the AC/DC adapter. The floppy disk drive will then work and the
MTS
e
will automatically begin to transfer the software from disk 1 to the
RAM. The screen is switched on :
"Starting file transfert to RAM"
. . . . . . . . . . . . . . . . . . . . . . . . . . .
The dots from the left to the right are showing the load in progress.
3.
When the following message appears insert disk 2 and hit the OK key.
"
Insert next boot disk and hit OK when ready
."
.
4.
If the main power is not on, the following message appears :
"
PLUG-IN EXTERNAL POWER TO CONTINUE
"
.
You have to connect this external power supply. It is automatically detected.
"
Do not remove power before flashing is complete
"
This message is very important: if you stop the process, the MTS
e
may be
damaged.
5.
After the message "
Boot flashing has begun
" wait for the following
message "
Boot flashing successful
". The boot software is then installed.
6.
You can press
ON
when the MTS
e
is ready (LED
ON
flashing) to check it is
operating correctly.
7.
Switch off the MTS
e
and unplug the external power before starting to load
the application software.
Installation of the application software
Proceed as follows to install the new software:
1.
With the MTS
e
switched off (AC/DC adapter unplugged), insert the disk 1
into the floppy disk drive.
2.
Plug in the AC/DC adapter. The green LED of the floppy disk drive lights up
and the MTS
e
will automatically begin to transfer the software from disk 1 to
the RAM.
"
Starting file transfer to RAM
"
. . . . . . . . . . . . . . . . . . . . . . . . . . .
The screen is switched on and some dots appear from the left to the right to
show the transfer in progress.
3.
Insert disk 2 and hit the OK key when the following message appears
"Insert next boot disk and hit OK when ready
."
.
4.
Repeat the preceding step, inserting the next disks.
5.
Once all the disks have been transferred, the MTS
e
prompts you to confirm
that you wish to update the internal memory with this new software release
,
by the message:
"
Current Flash contents will be erased, continue? (Y/N)
"
1. this version is displayed when the
MTS
e
is switched on, during the autotest.
Artisan Technology Group - Quality Instrumentation ... Guaranteed | (888) 88-SOURCE | www.artisantg.com