![background image](http://html1.mh-extra.com/html/acterna/mts-5100e/mts-5100e_user-manual_2842380025.webp)
U
SER
M
ANUAL
750000992/16
3-3
MTS
e
Before switching on
When the MTS
e
is being held during use, the support strap should replace the
carrying handle. Two positions are available:
1.
MTS
e
held in front, with the strap hanging around the neck of the user. The
carrying strap must then be fixed at the upper studs, as shown in the
following figure 1.
2.
MTS
e
held at the side, with the strap hanging around neck and under the arm
of the user. The carrying strap must then be fixed at one upper and one lower
studs, as shown in the following figure 2.
Possible strap positions
Positioning the handle or the carrying strap
The handle and straps are attached with metal studs to the sides of the
instrument as follows:
1
2
1- Position the attachment hole in the strap in-line with the
attachment stud.
left side
2- Rotate the handle through 90
°
so that it is locked onto
the attachment stud.
left side
Artisan Technology Group - Quality Instrumentation ... Guaranteed | (888) 88-SOURCE | www.artisantg.com