Acterna MTS 5100e Скачать руководство пользователя страница 162

Страница: 162 / 219

8-24

SER

ANUAL

750000992/16

File management

MTS

Press the

Format

key.

The

Abort> and <Confirm

keys are displayed to format the disk or abort

the operation.

Press the <Confirm> key to start formatting the floppy disk.

Note

If there is no disk inserted in the disk drive, when you try to format it
MTS

will display the following error message:

(201) Insert a disk
Hit any key to continue.

Note

If the disk is write protected MTS

will display the following error

message:

(200) disk error
Hit any key to continue.

While the disk is formatting, the floppy disk icon

is displayed in the

window title bar.
No other operation can be carried out while this formatting is in progress. Once

the formatting has completed the floppy disk icon is removed and you can
continue using MTS

normally.

Formatting the hard disk (if installed)

Attention

Formatting the hard disk will erase all the files present.

Use the following procedure to format a the hard disk:

Press the

FILE

key.

The

File manager

window appears.

Move the cursor on the media line and select the hard disk option in order to

display the

Format

key.

Press the <Format> key
The Format Code window is displayed.

Enter the code: 1313 using the left/right arrow key

Press the

Valid

key

The

Abort> and <Confirm

keys are displayed to format the disk or abort

the operation.

Press the <Confirm> key to start formatting the hard disk.

While the disk is formatting, the hard disk icon

is displayed in the window

title bar.
No other operation can be carried out while this formatting is in progress. Once

the formatting has completed the hard disk icon is removed and you can
continue using the MTS

normally.

Artisan Technology Group - Quality Instrumentation ... Guaranteed | (888) 88-SOURCE | www.artisantg.com

Содержание MTS 5100e




























































































































































































































Результаты поиска

Содержание MTS 5100e

Отзывы:

Похожие инструкции для MTS 5100e

Бренды по названию

Популярные бренды

Acterna MTS 5100e, Руководство пользователя

Результаты поиска

Содержание MTS 5100e

Отзывы:

Похожие инструкции для MTS 5100e

Бренды по названию

Популярные бренды