Acterna MTS 5100e Скачать руководство пользователя страница 131

Страница: 131 / 219

SER

ANUAL

750000992/16

7-7

MTS

Display of WDM results

Cursors

To move the A (or B) cursor by pressing the cursor key, first display <Cursor A>

(or <Cursor B>), then use the < or > arrow keys.
To move both cursors simultaneously, press the cursor key to display the <Curs.

AB> key, then use the < or > arrow keys.
The coordinates of the intersection point of the cursors with the trace are

indicated underneath the trace as well as the frequency difference (or the

wavelength) and the power between these points.

Trace shifting

To shift the trace horizontally or vertically, press the <Shift/Zoom> key to

display <Shift>, then use the direction arrow keys to make the required shift.

Zoom

In order to zoom in on the trace, press the <Shift/Zoom> key to display

<Zoom>, then use the direction arrow keys to zoom in either horizontally or

vertically.
The zoom of the display is made around the selected cursor. If <Cursor AB> was

selected the zoom is made at the mid point between the cursors.

Note

To reset the zoom and see the full trace, press and hold simulta-
neously the

and

keys.

The position of the displayed part of the trace with respect of the complete trace

is located by a (grey or yellow) line on the top of the trace window.
You can also manually zoom in on a part of the trace defining the start and/or

end of the screen in the OSA test-set menu (Display windows). In this case, the

channels which are out of the screen limits are not in the result table.

Successive zooms on each event

•

Zoom in on one of the event.

•

Press the <Event> key.

•

Use the

and

keys to move successively the display window on each

event.

Threshold of channel detection

On the trace some peaks corresponding to a noise could be mistaken for

channels. It is therefore necessary to set a power threshold level: only peaks

exceeding the threshold will be considered as channels and included in the

results table.
This threshold is represented by a red horizontal line on the trace:
To display this threshold or not, press the <Expert> key then the <Threshold>

key:

•

if the key indicates <Threshold> the threshold is displayed and can be moved

using the "

↑

" and «

↓

» arrow keys;

•

if the key indicates < Threshold Off> then the threshold is not displayed.

Artisan Technology Group - Quality Instrumentation ... Guaranteed | (888) 88-SOURCE | www.artisantg.com

Содержание MTS 5100e




























































































































































































































Результаты поиска

Содержание MTS 5100e

Отзывы:

Похожие инструкции для MTS 5100e

Бренды по названию

Популярные бренды

Acterna MTS 5100e, Руководство пользователя

Результаты поиска

Содержание MTS 5100e

Отзывы:

Похожие инструкции для MTS 5100e

Бренды по названию

Популярные бренды