ABB ACS880 Series, Руководство по прошивке

Страница: 393 / 764

Def / Type
FbEq 16b / 32b Description Name / Range /
Selection No.
- / uint32 Sets the warning limit for signal edge counter 2. Edge counter 2 warn
limit 33.41
- / - Warning limit for signal edge counter 2. 0...4294967295
- / uint16 Configures signal edge counter 2. Edge counter 2
function 33.42
0 = Loop: When the limit is reached, the counter is reset.
The counter status (bit 3 of
33.1 ) remains 1 until the
counter is again incremented. The warning (if enabled)
stays active for at least 10 seconds.
1 = Saturate: After the limit is reached, the counter
status (bit 3 of
33.1 ) remains 1 until 33.40 is reset. The
warning (if enabled) also stays active until 33.40 is
reset.
Counter mode b0
Warning enable
0 = Disable: No warning is given when the limit is
reached
1 = Enable: A warning (see
33.45 ) is given when the limit
is reached
Warning enable b1
Count rising edges
0 = Disable: Rising edges are not counted
1 = Enable: Rising edges are counted Count rising edges b2
Count falling edges
0 = Disable: Falling edges are not counted
1 = Enable: Falling edges are counted Count falling edges b3
Reserved b4…15
1 = 1 0000h…FFFFh
False / uint32 Selects the signal to be monitored by signal edge
counter 2. Edge counter 2
source 33.43
0 0. False
1 1. True
2 Bit 0 of 10.21 RO status (page 214) . RO1
See Terms and abbreviations (page 169) . Other [bit]
1 / uint32 Defines a divisor for signal edge counter 2. Determines
how many signal edges increment the counter by 1. Edge counter 2
divider 33.44
- / - Divisor for signal edge counter 2. 1...4294967295
Edge counter 2
exceeded / uint32 Selects the optional warning message for signal edge
counter 2. Edge counter 2 warn
message 33.45
3 A889 Edge counter 2 . The message text can be edited
on the control panel by choosing Menu – Settings – Edit
texts.
Edge counter 2
exceeded
11 A884 Main contactor . Counted main
contactor
12 A881 Output relay . Counted output
relay
13 A882 Motor starts . Counted motor
starts
Parameters 393