ABB ACS880 Series, Руководство по прошивке

Страница: 391 / 764

Def / Type
FbEq 16b / 32b Description Name / Range /
Selection No.
1 Constant 1. True
2 Bit 0 of 10.21 RO status (page 214) . RO1
See Terms and abbreviations (page 169) . Other [bit]
On-time 2 exceeded
/ uint32 Selects the optional warning message for on-time timer
2. On-time 2 warn
message 33.24
1 A887 On-Time 2 . The message text can be edited on
the control panel by choosing Menu – Settings – Edit
texts.
On-time 2 exceeded
6 A88C Device clean . Clean device
7 A890 Additional cooling fan . Maintain additional
cooling fan
8 A88E Cabinet fan . Maintain cabinet fan
9 A88D DC capacitor . Maintain DC
capacitors
10 A880 Motor bearing . Maintain motor
bearing
- / uint32 Actual present value of signal edge counter 1.
The counter is incremented every time the signal
selected by parameter
33.33 Edge counter 1 source
switches on or off (or either, depending on the setting
of
33.32 Edge counter 1 function ). A divisor may be
applied to the count (see 33.34 Edge counter 1 divider ).
When the counter exceeds the limit set by 33.31 Edge
counter 1 warn limit , bit 2 of 33.1 Counter status is set
to 1. The warning specified by 33.35 Edge counter 1
warn message is also given if enabled by 33.32 Edge
counter 1 function .
The counter can be reset from the Drive Composer PC
tool, or from the control panel by keeping Reset
depressed for over 3 seconds.
Edge counter 1
actual 33.30
- / - Actual present value of signal edge counter 1. 0...4294967295
- / uint32 Sets the warning limit for signal edge counter 1. Edge counter 1 warn
limit 33.31
- / - Warning limit for signal edge counter 1. 0...4294967295
- / uint16 Configures signal edge counter 1. Edge counter 1
function 33.32
0 = Loop: When the limit is reached, the counter is reset.
The counter status (bit 2 of
33.1 ) switches to 1 and
remains so until the counter is again incremented. The
warning (if enabled) stays active for at least 10 seconds.
1 = Saturate: When the limit is reached, the counter
status (bit 2 of
33.1 ) switches to 1, and remains so until
33.30 is reset. The warning (if enabled) also stays active
until 33.30 is reset.
Counter mode b0
0 = Disable: No warning is given when the limit is
reached
1 = Enable: A warning (see
33.35 ) is given when the limit
is reached
Warning enable b1
Parameters 391