ABB ACS880 Series, Руководство по прошивке

Страница: 413 / 764

Def / Type
FbEq 16b / 32b Description Name / Range /
Selection No.
0 None Zero
1 1.1 Motor speed used (page 174) . Motor speed used
3 1.6 Output frequency (page 174) . Output frequency
4 1.7 Motor current (page 174) . Motor current
6 1.10 Motor torque (page 174) . Motor torque
7 1.11 DC voltage (page 175) . DC voltage
8 1.14 Output power (page 175) . Power inu out
10 23.1 Speed ref ramp input (page 311) . Speed ref ramp in
11 23.2 Speed ref ramp output (page 311) . Speed ref ramp out
12 24.1 Used speed reference (page 318) . Speed ref used
13 26.2 Torque reference used (page 338) . Torq ref used
14 28.2 Frequency ref ramp output (page 347) . Freq ref used
16 40.1 Process PID output actual (page 420) . Process PID out
17 40.2 Process PID feedback actual (page 420) . Process PID fbk
18 40.3 Process PID setpoint actual (page 420) . Process PID act
19 40.4 Process PID deviation actual (page 420) . Process PID dev
See Terms and abbreviations (page 169) . Other [value]
20 1.70 Ambient temperature % (page 177) .
The amplitude range of 0…100% corresponds to
0…60 °C or 32…140 °F.
Ambient
temperature
100.00 / real32 Defines the signal value that corresponds to 100%
amplitude. AL2 signal scaling 36.7
1 = 1 / 100 = 1 Signal value corresponding to 100%. 0.00 ... 32767.00
- / uint16 Determines whether amplitude loggers 1 and 2 are
active continuously or only when the drive is
modulating. Logger function 36.8
0 = Amplitude logger 1 active continuously
1 = Amplitude logger 1 active only when the drive is
modulating AL1 b0
0 = Amplitude logger 2 active continuously
1 = Amplitude logger 2 active only when the drive is
modulating AL2 b1
Reserved b2…15
1 = 1 0000h…FFFFh
Done / uint16 Resets the peak value logger and/or amplitude logger
2.
(Amplitude logger 1 cannot be reset.) Reset loggers 36.9
0 Reset completed or not requested (normal operation). Done
1 Reset both the peak value logger and amplitude logger
2. All
2 Reset the peak value logger. PVL
Parameters 413