ZyXEL Communications LTE3301-PLUS User Manual Download Page 30

Page: 30 / 361

Chapter 2 Hardware Panels

Nebula Mobile Router User’s Guide

2.2.5 Nebula FWA510

Figure 10

Nebula FWA510 LED

The following are the LED descriptions for your Nebula FWA510.

Table 7 Nebula FWA510 LED Behavior

LED

COLOR

STATUS

DESCRIPTION

Power

Green

The Zyxel Device is receiving power and ready for use.

Blinking

The Zyxel Device is booting.

Off

The Zyxel Device is not receiving power.

Red

Zyxel Device error, need to take action.

SMS

Green

There is a new SMS message.

Blinking

The Inbox is full.

Off

There is no unread SMS message.

Cellular Signal
Strength

Blue

The signal strength is good.

Green

The signal strength is medium.

Red

The signal strength is poor.

Blinking

There is no cellular signal, or signal strength is below the poor
level.

Off

The Zyxel Device is booting.

Internet

Blue

The Zyxel Device is connected to the Internet using 5G.

Green

The Zyxel Device is connected to the Internet using 4G, or is
connected in Ethernet WAN mode.

Red

Internet connection is unavailable.

WiFi/WPS

Green

WiFi is enabled.

Blinking

WPS is activated, and the Zyxel Device is establishing a WPS
connection.

Off

WiFi is disabled.

Summary of Contents for LTE3301-PLUS










































































































































































































































































































































































Search results

Summary of Contents for LTE3301-PLUS

Reviews:

Related manuals for LTE3301-PLUS

Brands by name

Popular brands

ZyXEL Communications LTE3301-PLUS, User Manual

Search results

Summary of Contents for LTE3301-PLUS

Reviews:

Related manuals for LTE3301-PLUS

Brands by name

Popular brands