Chapter 16 Nebula
Nebula Mobile Router User’s Guide
225
Each field is described in the following table.
Table 89 Network Setting > Nebula
LABEL
DESCRIPTION
Nebula
Discovery
Slide the switch to the right to enable
Nebula Discovery
to have the Zyxel Device try to connect
to the NCC. Once the Zyxel Device is connected to and has registered in the NCC, it’ll go into
the Nebula cloud management mode.
If
Nebula Discovery
is disabled, the Zyxel Device will not discover the NCC and remain in
standalone operation.
This is not configurable and will only display
ON
when your Zyxel Device is being managed by
NCC.
Use Proxy to
Access to NCC
If the Zyxel Device is behind a proxy server, slide the switch to the right to enable this feature.
Configure the proxy server settings so the Zyxel Device can access the NCC through the proxy
server.
Proxy Server
Enter the IP address of the proxy server.
Proxy Port
Enter the service port number used by the proxy server.
Authentication
Enable this if the proxy server requires authentication before it grants access to the NCC.
User Name
Enter you proxy user name.
Password
Enter your proxy password.
Apply
Click
Apply
to save your changes back to the Zyxel Device.
Cancel
Click
Cancel
to set the settings in this screen back to default.
Summary of Contents for LTE3301-PLUS
