Chapter 6 Connection Status
Nebula Mobile Router User’s Guide
104
Figure 57
LAN
Click the Arrow icon ( ) to configure the LAN IP settings and DHCP setting for your Zyxel Device.
Figure 58
LAN Setup
Each field is described in the following table.
Table 25 LAN Setup
LABEL
DESCRIPTION
Group Name
Select the interface group you want to use. Usually
Default
.
LAN IP Setup
IP Address
Enter the LAN IPv4 IP address you want to assign to your Zyxel Device in dotted decimal
notation, for example, (factory default).
Subnet Mask
Type the subnet mask of your network in dotted decimal notation, for example 255.255.255.0
(factory default). Your Zyxel Device automatically computes the subnet mask based on the
IP Address you enter, so do not change this field unless you are instructed to do so.
IP Addressing Values
Beginning IP
Address
This field specifies the first of the contiguous addresses in the IP address pool.
Summary of Contents for LTE3301-PLUS
