ZyXEL Communications LTE3301-PLUS User Manual Download Page 47

Page: 47 / 361

Chapter 3 Web Configurator

Nebula Mobile Router User’s Guide

MAC
Authentication

Use this screen to block or allow wireless traffic from wireless devices of
certain SSIDs and MAC addresses to the Zyxel Device.

WPS

Use this screen to configure and view your WPS (WiFi Protected Setup)
settings.

WMM

Use this screen to enable or disable WiFi MultiMedia (WMM).

Others

Use this screen to configure advanced wireless settings.

WLAN Scheduler

Use this screen to create rules to schedule the times to permit Internet
traffic from each wireless network interfaces.

Channel Status

Use this screen to scan wireless LAN channel noises and view the results.

Home

Networking

LAN Setup

Use this screen to configure LAN TCP/IP settings, and other advanced
properties.

Static DHCP

Use this screen to assign specific IP addresses to individual MAC
addresses.

UPnP

Use this screen to turn UPnP and UPnP NAT-T on or off.

Custom DHCP

Use this screen to configure additional DHCP options.

Routing

Static Route

Use this screen to view and set up static routes on the Zyxel Device.

DNS Route

Use this screen to forward DNS queries for certain domain names through
a specific WAN interface to its DNS servers.

Policy Route

Use this screen to configure policy routing on the Zyxel Device.

RIP

Use this screen to configure Routing Information Protocol to exchange
routing information with other routers.

NAT

Port Forwarding

Use this screen to make your local

servers visible to the outside world.

Port Triggering

Use this screen to change your Zyxel Device’s port triggering settings.

DMZ

Use this screen to configure a default server which receives packets from
ports that are not specified in the

Port Forwarding

screen.

ALG

Use this screen to enable the ALGs (Application Layer Gateways) in the
Zyxel Device to allow applications to operate through NAT.

DNS

DNS Entry

Use this screen to view and configure DNS routes.

Dynamic DNS

Use this screen to allow a static hostname alias for a dynamic IP address.

USB

USB Service

Use this screen to enable file sharing through the Zyxel Device.

VLAN Group

Use this screen to group and tag VLAN IDs to outgoing traffic from the
specified interface.

Interface

Grouping

Interface
Grouping

Use this screen to map a port to create multiple networks on the Zyxel
Device.

Nebula

Use this screen to enable

Nebula Discovery

and configure proxy server

settings.

Security

Firewall

General

Use this screen to configure the security level of your firewall.

Protocol

Use this screen to add Internet services and configure firewall rules.

Access Control

Use this screen to enable specific traffic directions for network services.

DoS

Use this screen to activate protection against Denial of Service (DoS)
attacks.

MAC Filter

Use this screen to block or allow traffic from devices of certain MAC
addresses to the Zyxel Device.

Table 18 Navigation Panel Summary (continued)

LINK

TAB

FUNCTION

Summary of Contents for LTE3301-PLUS










































































































































































































































































































































































Search results

Summary of Contents for LTE3301-PLUS

Reviews:

Related manuals for LTE3301-PLUS

Brands by name

Popular brands

ZyXEL Communications LTE3301-PLUS, User Manual

Search results

Summary of Contents for LTE3301-PLUS

Reviews:

Related manuals for LTE3301-PLUS

Brands by name

Popular brands