ZyXEL Communications LTE3301-PLUS User Manual Download Page 126

Page: 126 / 361

Chapter 7 Broadband

Nebula Mobile Router User’s Guide

126

7.10 Cellular IP Passthrough

Enable

IP Passthrough

to allow Internet traffic to go to a LAN computer behind the Zyxel Device without

going through NAT.

Click

Network Setting

Broadband

Cellular IP Passthrough

to display the following screen.

Note: This screen is not available when the fourth LAN port acts as an Ethernet WAN port.

Note: This screen is not available for models that support the

IP Passthrough

settings in the

Network Setting

Broadband

Cellular APN

Edit

screen.

Note: This screen is not available if Ethernet WAN is enabled at

Network Setting

Broadband

Ethernet WAN

State

Figure 73

Network Setting > Broadband > Cellular IP Passthrough

Note: Changing the

IP Passthrough

settings may affect the network setting of client devices.

After selecting to enable the following warning appears. Click

to continue.

Figure 74

Network Setting > Broadband > Cellular IP Passthrough > Enable Warning

Summary of Contents for LTE3301-PLUS










































































































































































































































































































































































Search results

Summary of Contents for LTE3301-PLUS

Reviews:

Related manuals for LTE3301-PLUS

Brands by name

Popular brands

ZyXEL Communications LTE3301-PLUS, User Manual

Search results

Summary of Contents for LTE3301-PLUS

Reviews:

Related manuals for LTE3301-PLUS

Brands by name

Popular brands