ZyXEL Communications LTE3301-PLUS, User Manual

Page: 169 / 361

Chapter 9 Home Networking
Nebula Mobile Router User’s Guide
169
9.3 Static DHCP
When any of the LAN clients in your network want an assigned fixed IP address, add a static lease for
each LAN client. Knowing the LAN client’s MAC addresses is necessary. This table allows you to assign IP
addresses on the LAN to individual computers based on their MAC addresses.
Every Ethernet device has a unique MAC (Media Access Control) address. The MAC address is assigned
at the factory and consists of six pairs of hexadecimal characters, for example, 00:A0:C5:00:00:02.
9.3.1 Before You Begin
Find out the MAC addresses of your network devices if you intend to add them to the Static DHCP
screen.
Use this screen to change your Zyxel Device’s static DHCP settings. Click Network Setting > Home
Networking > Static DHCP to open the following screen.
Figure 101 Network Setting > Home Networking > Static DHCP
DNS Query Scenario Select how the Zyxel Device handles clients’ DNS information requests.
IPv4/IPv6 DNS Server : The Zyxel Device forwards the requests to both the IPv4 and IPv6 DNS
servers and sends clients the first DNS information it receives.
IPv6 DNS Server Only : The Zyxel Device forwards the requests to the IPv6 DNS server and
sends clients the DNS information it receives.
IPv4 DNS Server Only : The Zyxel Device forwards the requests to the IPv4 DNS server and
sends clients the DNS information it receives.
IPv6 DNS Server First : The Zyxel Device forwards the requests to the IPv6 DNS server first and
then the IPv4 DNS server. Then it sends clients the first DNS information it receives.
IPv4 DNS Server First : The Zyxel Device forwards the requests to the IPv4 DNS server first and
then the IPv6 DNS server. Then it sends clients the first DNS information it receives.
Apply Click Apply to save your changes.
Cancel Click Cancel to restore your previously saved settings.
Table 57 Network Setting > Home Networking > LAN Setup (continued)
LABEL DESCRIPTION