Chapter 11 Network Address Translation (NAT)
Nebula Mobile Router User’s Guide
197
Figure 125
Network Setting > NAT > Port Forwarding: Add or Edit
Note: To configure port forwarding, you need to have the same configurations in the
Start
Port
,
End Port
,
Translation Start Port
, and
Translation End Port
fields.
To configure port translation, you need to have different configurations in the
Start Port
,
End Port
,
Translation Start Port
, and
Translation End Port
fields.
Here is an example to configure port translation. Configure
Start Port
to 100,
End Port
to
120,
Translation Start Port
to 200, and
Translation End Port
to 220.
Note: TCP port 7547 is reserved for system use.
The following table describes the labels in this screen.
Table 72 Network Setting > NAT > Port Forwarding: Add or Edit
LABEL
DESCRIPTION
Active
Click to turn the port forwarding rule on or off.
Service Name
Select a service to forward or select
User Defined
and enter a name in the field to the right.
WAN Interface
Select the WAN interface for which to configure NAT port forwarding rules.
Summary of Contents for LTE3301-PLUS
