Chapter 7 Broadband
Nebula Mobile Router User’s Guide
129
Figure 76
Network Setting > Broadband > Cellular Lock (5G)
The following table describes the fields in this screen.
7.12 Cellular SMS
Use this screen to send and receive SMS messages using the SIM card installed in the Zyxel Device.
Click
Network Setting
>
Broadband
>
Cellular SMS
. The following screen displays.
Table 39 Network Setting > Broadband > Cellular Lock (5G)
LABEL
DESCRIPTION
NR(5G) Lock Management
PCI_Enable
Click the switch button (to the right) to enable PCI (Physical Cell Identifier) Lock on a
base station when the Zyxel Device has a 5G NR connection.
Band
Enter the band number to which you choose to connect.
Note: Make sure to select the same band in the
Network Setting
>
Broadband
>
Cellular Band
screen so as the Zyxel Device can connect to that
band.
PCI
Use this to enter the PCI number of the base station you want the Zyxel Device to
connect to (0 – 504).
RFCN
Enter the RFCN (Radio Frequency Channel Number) for the 5G NR frequency of the
specified PCI (1 – 65535).
SCS
Select the Subcarrier Spacing (SCS) from the drop-down list. Subcarriers are small signal
carriers that divide a frequency channel, which is the main carrier wave. Subcarrier
spacing is the space between each subcarrier. At the time of writing, SCS ranges from
15-120 KHz.You should select the same SCS that is used by the ISP.
Cancel
Click this to exit this screen without saving.
Apply
Click this to save your changes.
Summary of Contents for LTE3301-PLUS
