![background image](http://html2.mh-extra.com/html/zeiss/lsm-510-inverted/lsm-510-inverted_operating-manual_3312162241.webp)
OPERATION
LSM 510
Annex
B 40-051 e 07/98
4-183
The
Current Position
and
Selected Position
display for X and Y is below.
Below that, you will find the table of marked positions and the possibility to activate and delete them.
Moving the scanning stage
The scanning stage can be moved using the joystick, or software-controlled using the sliders.
<Manual>
This button activates/deactivates the motor control of the stage and the joystick, if available.
If <Manual> is active, the scanning stage can be moved manually via the knurled screws. The <Move to>
and <Center> function keys in <Stage Position> are without a function. The Current position is updated.
You can zero the display via <ZERO> and mark manually set positions (<Mark>).
The scanning stage cannot be moved via the software or the joystick.
If <Manual> is deactivated, the scanning stage can be moved via the software or the joystick. All the
functions of the "Stage Position" window are available.
<Move to>
Clicking on the <Move to> button moves the stage to the position marked in the symbolic specimen
carrier. An area in the object slider is marked by clicking on the specimen carrier in the required area. The
currently marked area is displayed by red crosslines in the specimen carrier. Their X/Y coordinates are
displayed under
Selected Position
.
Already marked positions are shown in the specimen carrier as white circles with ordinal number and can
be easily activated again by clicking and by triggering the Move command.
<Mark>
<Mark> allows the
Current Position
to be marked. This marked position is then stored in the Marks
table in sequence. The marked position is shown on the specimen carrier with a circle and its ordinal
number.
<Center>
Moves the stage to the current zero position.
Summary of Contents for LSM 510 Inverted
